RS232 / RS485 interface converter for connection of SEIKA sensors with RS485 interface to RS232 port of a computer
The interface converter consists of an aluminium housing with a PCB, a 9-channel SubD port for the RS232 bus, a 4-channel clamp for the RS485 bus, a plug for the external 12V supply voltage, two LEDs for monitoring system operation, the bus voltage level and termination resistances and the interface electronics with voltage level converters and transmission line drivers and receivers.
The interface converter connects any SEIKA sensor with RS485 data output interface to the RS232 port of a computer.
|Supply voltage||12Volt ± 3Volt|
|Current drawn||approx.30mA + current drawn by sensors|
|RS485 terminals||4 x 1.5mm2|
|RS232 port||DSub9 socket|
|RS485 Bus||half duplex|
|Terminator resistance||100 Ohm, can be disengaged by solder bridge|
|ESD protection on RS485 bus||±15kV (Human Body Model)|
|Participants on single bus||max. 128|
|Data transfer rate||max. 250kbps|
Connection to SEIKA-RS232/485 converter SC485B
Dimensions (in mm)
SEIKA Mikrosystemtechnik GmbH - Ellharter Strasse 10 - 87435 Kempten - Germany - EMail: email@example.com