XB...

Revised model

The XB housing is an extra-robust, pressure-, saltwater- and corrosion-proof stainless steel housing for one or two SEIKA sensors. It can contain the same sensor models and electronics like the SB-housing. It is available with a compact stainless steel cable gland and a Subconn cable gland for seawater and underwater usage

Features

Description

The XB.. is an extra robust, pressure-, saltwater- and corrosion-proof stainless steel housing with an integrated sensor or sensors and one of the sensor electronic systems described for the SB.. sensor casings.
The compact stainless steel cable gland and stainless steel housing size enable the use of this high quality measuring system in especially harsh operating conditions.


Application

The XB.. is suited for taking precise inclination or acceleration measurements under harsh circumstances and returning of a 0...5V or 4...20mA output signal. Areas of application include construction, mining, agricultural machinery, transportation and conveyor systems, ships, in aggressive fluids and in saltwater, in high pressure environments, operation and automation technology as well as general mechanical engineering.


Technical Specifications

Housing material V4A (saltwater proof)
Cable gland PG9, clamping range 8mm - 10.5mm
Pressure resistance 100 bar (10Mpa), 1000m H2O with Subconn connector - higher pressure resistance is currently being tested
Terminals depending on the built-in board
Measuring range, resolution, etc. depending on the integrated sensor(s)
Mounting position any
Measuring planes (N.. sensor) 3 main housing planes
Measuring plane (NG.. sensor) parallel to housing bottom
Measuring directions (B.., BD.. sensor) in X,Y,Z coordinates of housing
Electrical values please see datasheets of identically equipped SB sensor boxes
Operating temperature -40...+85°C

Options

Dimensions

XB.. with underwater connector or cable gland

Please order connector plug (no. MCIL4F or MCDC4F), coupling ring (no. MCDLSF) and cable from your nearest Subconn distributor (not supplied).

 


Nomenclature

XB1i = XB Housing including electronic and sensor like in the Sensorbox SB1I

XB2I = XB Housing including electronic and sensors like in the Sensorbox SB2I

XB1U = XB Housing including electronic and sensor like in the Sensorbox SB1U

XB1S = XB Housing including electronic and sensor like in the Sensorbox SB1

XBS1U = XB Housing including electronic and sensor like in the Sensorbox SBS1U

XB360 = XB Housing including electronic and sensor like in the Sensorbox SB360


Accessory - XBW1 (special screw-top opener)

 

 

typical use

 

SEIKA front page

 

SEIKA Mikrosystemtechnik GmbH - Söllerweg1- D 87487 Wiggensbach - email: seika@seika.de - Tel.+49 8370 9290070 - FAX:+49 8370 9290079

H118S